fps to m/s Converter – Convert Feet per Second to Metres per Second Online
Free online converter for Indian shooters, engineers and students to convert feet per second to metres per second instantly. Handy for airgun and paintball arena checks, IS-code calculations and physics homework. Exact fps to m/s results every time.
Speed & Velocity Converter - km/h, mph, m/sThe quick answer for 1 Feet per Second — type any value below for the exact result
Feet per Second
Meters per Second
fps to m/s Conversion Formula
To convert feet per second to metres per second, multiply the fps value by 0.3048. This is exact, because the international foot is defined as precisely 0.3048 metres.
Feet per Second and Meters per Second Explained
Feet per Second (fps)
The foot per second (fps, ft/s) is the speed of covering one international foot each second, equal to exactly 0.3048 m/s and about 0.681818 mph. It is the native unit of American shooting sports, and Indian shooters meet it on imported ammunition boxes, chronograph readouts and arena rules: .177 airgun pellets leave the muzzle at 500-800 fps, service pistol rounds at 900-1350 fps, and full-power rifle bullets at 2500-3200 fps, with the sound barrier sitting at 1125 fps in warm air.
Where it is used: It dominates imported ammunition packaging, chronograph displays at ranges in India, airsoft and paintball arena rules, and US engineering handbooks that tabulate velocities per second.
Origin: It builds on the foot, whose length varied across jurisdictions until the 1959 international agreement fixed it at exactly 0.3048 metres.
Meters per Second (ms)
The metre per second (m/s) is the SI derived unit of velocity — metres travelled per second — with 1 fps equal to 0.3048 m/s and 1 m/s equal to 3.28084 fps. Its scale covers the physics of flight and machinery: a 91.44 m/s paintball, 381 m/s pistol round, 853.44 m/s rifle bullet, and 343 m/s sound wave in air all read naturally in m/s, which is why ballistic coefficient tables, drag models and Indian engineering curricula are computed in SI.
Where it is used: It is standard in scientific ballistics, SI-based documents from the Bureau of Indian Standards, CBSE and university physics education, and metrology labs worldwide.
Origin: It rests on the metre, born in 1790s France and redefined in 1983 via the distance light travels in 1/299,792,458 of a second.
fps to m/s Conversion Table
| Feet per Second (fps) | Meters per Second (ms) |
|---|---|
| 10 fps | 3.048 ms |
| 25 fps | 7.62 ms |
| 50 fps | 15.24 ms |
| 100 fps | 30.48 ms |
| 200 fps | 60.96 ms |
| 250 fps | 76.2 ms |
| 300 fps | 91.44 ms |
| 350 fps | 106.68 ms |
| 400 fps | 121.92 ms |
| 500 fps | 152.4 ms |
| 700 fps | 213.36 ms |
| 900 fps | 274.32 ms |
| 1000 fps | 304.8 ms |
| 1125 fps | 342.9 ms |
| 1250 fps | 381 ms |
| 1500 fps | 457.2 ms |
| 2000 fps | 609.6 ms |
| 2500 fps | 762 ms |
| 2800 fps | 853.44 ms |
| 3200 fps | 975.36 ms |
Meters per Second to Feet per Second Conversion Table
| Meters per Second (ms) | Feet per Second (fps) |
|---|---|
| 1 ms | 3.280839895 fps |
| 5 ms | 16.4041994751 fps |
| 10 ms | 32.8083989501 fps |
| 30 ms | 98.4251968504 fps |
| 50 ms | 164.0419947507 fps |
| 91.4 ms | 299.8687664042 fps |
| 100 ms | 328.0839895013 fps |
| 200 ms | 656.1679790026 fps |
| 250 ms | 820.2099737533 fps |
| 300 ms | 984.2519685039 fps |
| 343 ms | 1125.3280839895 fps |
| 500 ms | 1640.4199475066 fps |
| 1000 ms | 3280.8398950131 fps |
Feet per Second to Meters per Second in Everyday Objects
Common real-world examples that make Feet per Second and Meters per Second easy to picture at a glance.
| Feet per Second (fps) | Meters per Second (ms) | |
|---|---|---|
| Paintball arena velocity limit | 300 fps | 91.44 ms |
| Airsoft site velocity limit | 350 fps | 106.68 ms |
| Full-power .177 air rifle pellet | 900 fps | 274.32 ms |
| Speed of sound in air | 1125 fps | 342.9 ms |
| 9mm service pistol muzzle velocity | 1250 fps | 381 ms |
| .308 rifle muzzle velocity | 2800 fps | 853.44 ms |
| .223 rifle muzzle velocity | 3200 fps | 975.36 ms |
When You Need Feet per Second to Meters per Second Conversions
Meeting airgun and paintball arena limits
Paintball arenas in Bengaluru, Mumbai and the NCR enforce limits around 300 fps (91.44 m/s), while international event rules post m/s. Indian rules keep licence-free .177 air rifles modest in power, so a quick fps-to-m/s check confirms your kit passes tech inspections on either scale.
Cross-referencing imported reloading manuals
Imported US manuals list a .308 load at 2800 fps while European editions of the same data print 853.44 m/s. Converting fps to m/s lets licensed shooters compare charge tables and chronograph logs across publishers without guesswork.
Setting up high-speed photography
Bullet-photography rigs popular in engineering college labs trigger a flash microseconds after a sound sensor fires. Knowing a 1250 fps round travels 381 m/s sets the sensor-to-frame distance, since the timing geometry is computed in metres.
Converting US engineering handbooks
American fluid and piping references quote velocities like 5 fps (1.524 m/s) for drain self-cleansing, while the CPHEEO manual and IS codes state the same limits in m/s. Converting fps to m/s keeps hydraulic and pneumatic calculations dimensionally consistent.
Related Speed Conversions
How to Use
-
1
Enter fps Value
Type the speed in feet per second — typical entries include .177 air rifle pellets popular in India (500-800 fps), service pistol rounds (900-1350 fps), or imported rifle loads (2500-3200 fps)
-
2
View m/s Result
The equivalent m/s value appears instantly. For example, a 1250 fps 9mm round converts to 381 m/s
-
3
Copy or Swap
Copy the result or click Swap — the converter will do the needful and convert m/s back to fps
-
4
Compare With the Sound Barrier
Check your value against 343 m/s (1125 fps at 20°C) — anything below is subsonic and stays quieter downrange. In Delhi's 45°C summer the barrier climbs to about 357 m/s, so warm-weather readings sit slightly higher
Why Use Be Converter?
Instant Conversion
Get precise fps to m/s results in real-time as you type — ideal at the chronograph during range practice or while reading imported ballistic charts
High Accuracy
Uses the exact definition 1 fps = 0.3048 m/s, anchored to the 1959 international foot agreement — the same factor used in Bureau of Indian Standards SI conversions
Conversion Table
Quick reference for arena and field limits: 300 fps = 91.44 m/s (paintball), 350 fps = 106.68 m/s (airsoft), and 1125 fps = 342.9 m/s (sound)
Bidirectional
Easily swap between fps and m/s with one click for reverse conversions
Free & No Signup
No registration required. Do a dozen conversions or a lakh — completely free forever, not a single rupee
Privacy First
All calculations happen in your browser. No data is sent to any server
Frequently Asked Questions
What is 1000 fps in m/s?
How do I convert fps to m/s?
What is 300 fps in m/s?
What is the speed of sound in fps?
Is this tool free to use?
What is 1250 fps in m/s?
What is 2800 fps in m/s?
Why do SI-based ballistic charts and Indian physics textbooks use m/s instead of fps?
About fps to m/s Converter
Our free online fps to m/s converter turns American ballistic and engineering velocities into the SI units India works in — from cricket speed-gun readings to rifle muzzle velocities and pipeline flows. Whether you are checking a 300 fps paintball limit at an arena in Bengaluru or Mumbai, verifying a licence-free .177 air rifle against a power ceiling, comparing chronograph readings with imported SI-based manuals, timing a high-speed camera trigger at an engineering college lab against the 1125 fps sound barrier, or converting US fluid-handbook pipe velocities of 5 fps (1.524 m/s) for CPHEEO and IS-code calculations, this tool applies the exact definition 1 fps = 0.3048 m/s. Feet per second governs imported handbooks and ammo boxes; metres per second governs Indian engineering and science — this converter joins them instantly.
Expert Tips for fps to m/s Conversion
Multiply by 0.3048 exactly: 343 m/s sound speed converts back to 1125.33 fps, so any supersonic rifle at 3000 fps is running 914.4 m/s — 2.67 times the barrier
Field-limit anchors: 300 fps = 91.44 m/s (paintball), 350 fps = 106.68 m/s (UK airsoft sites), 500 fps = 152.4 m/s (many airgun power ceilings abroad)
Suppressor math: anything under 1125 fps (342.9 m/s at 20°C) avoids the supersonic crack. Subsonic .22 LR near 1070 fps is 326.14 m/s — already below the line
Engineering crossover: US plumbing codes size drains around 2 fps (0.61 m/s) minimum velocity, while ISO literature quotes m/s directly — converting keeps hydraulic calcs consistent
High-speed photography: freezing a 1250 fps (381 m/s) bullet needs a flash around 1/50,000 s; knowing the m/s value sets your sound-trigger delay since the sensor geometry is metric